Handheld Digital Salt/TDS-Meter

  * This product measures the concentration of dissolved NaCl/TDS in water.
* Simply immerse the tip of this Meter into liquids and know the NaCl/TDS
content/Temperature measurement in water. ## Application Fields: (Home /Health /Food Industry /Marine Aquariums)
- Food: Salt amount of food (Food/Seafood/Salted food/Processed food)
- Health: Measuring the Salt intake amount periodically
- Standard: Preservation of fixed taste of food
- Fishery: Aquatic products/Sea fishing place/Marine Aquariums(Hobbist)
- Livelihood: Water treatment/Fish farm/Aquarium/Drinking water etc
- Temp Test: Portable Thermometer for normal low temperature
- Water Test: Purity degree of water measurement/Water management
-Industry: Boiler/Cooling tower/Reservoir/Print/Lab etc
- Agriculture: Apply for Fertilizer/Soil/Plant and Cultivate ## Technology : Three in One
- Measurement : Salt(%) / TDS(ppm,mg/L) / Temp(?C)
- Range :1>Salt: 0.00-5.00% 2>TDS : 0-999ppm(mg/L)
- Operating Temp : 0?C-70?C (32?F-158?F)
- Display : 37x12mm LCD 3 digital Digit with 7 bar
- Battery type/Life : LR44 x 3ea / Abt 1 month based on 10 times use per day
- Dimension/Weight : 16x32x225mm / Abt 54g ## Feature:
- "NEW" Automatic Calibration and Temp.(?C/?F) Exchange
- Easy to read 3 digital digit LCD Display
- Fast response : Abt 6 Sec.
- Auto switch off and temp compensation ## WHAT IS TDS ? : Total Dissolved Solids
; The sum or all inorganic particulate material
- Water contains a variety of minerals and salts,such as calcium,magnesium,
carbonate,chloride and nitrates etc.
- TDS means the parameter measuring the total sum of all these compounds
in water.
- TDS is an indicator test used for wastewater analysis and is also measure
of the mineral content of bottled water and groundwater. ** Day Salt Intake Limitation Amount of the Main Country/
1. U.S.A: Within Average 6g (Salt) per day
2. Japan : - 10g -
3. Britain : - 4g -
4. Korea : - 8.7g -
5. WHO : -6g -(World Health Organization)
= " NEW " Process of Automatic Calibration (Salt Concentration) = 1.Press Power button (ON/OFF)
2.Press "MODE" button
3.Put the sensor part into 2% NaCl Standard Solution
(While calibrating,make sure the sensor does not contact the 2% NaCl
Standard Solution bottom or sides within the measured sample)
4.While the sensor is in the solution, press down "HOLD/CAL" button for 3 Sec.,
then "CAL" signal will be displayed on LCD with the beep(Buzzer sound).
5.When the "CAL" signal is displayed, wait for 5-10 Sec. without pressing any keys.
6.After 5-10 Sec. later, 2% value will be displayed on LCD
7.Calibration is completed if the 2% value is displayed on LCD.
¡ô All HDS-1024 have been factory tested and calibrated for accuracy.
¡ô Calibration does not needed every time, only when the measuring value is abnormal. = '" NEW " Process of Automatic Temperature (¡ãC / ¡ãF) Exchange = 1)¡ãC > ¡ãF Automatic Exchange;
1. Press POWER button (ON/OFF)
2. Press down ?HOLD/CAL? button for 3 Sec. more until you hear a beep.
3. Stop holding down the button after the beep (Buzzer Sound), automatically
"¡ãF" figure will be displayed on LCD.
4. "¡ãF" figure displays on LCD, the auto Temp. Exchange is completed.
2)¡ãF > ¡ãC Automatic Exchange: The process of Exchange is same operation as above.
¡ô Auto Temperature Exchange does not need to put into calibration solution or any
aqueous solution
¡ô ¡ãC or ¡ãF already have been fixed when this product is out of factory. Related Keywords: Measuring Equipment, Households goods